Instructions for use of WIZARD metal care products

You can also download the instructions for use below as a .pdf file under the following links:
Download instructions for use in German
Download instructions for use
inEnglish

WZ200 WIZARD Silver Cleaner
Deoxidizing cleaner for refreshing and shining silver plating. Powerful deoxidizing cleaner to refresh and shine silver plating and gold. Soak or spray pieces in a bath for a few seconds, rub in with a sponge or brush and rinse under lukewarm running water. Wipe off with a soft cloth.
Article in the shop: https://shop.mtp-music.de/artikel-details/WZ2001.aspx

WZ202 WIZARD PLANT DECOALING CLEANER
Cle
ans and radically removes all deposits, limescale and dried residues. Complies with legislation for products that may come into contact with food, products and beverages for human consumption. Allow to soak in a bath containing up to 10% WZ 202. The decalcification time depends on the thickness of the lime layer. Rinse thoroughly with soapy water. Stabilize with WIZARD WZ402 passivation solution. This will delay re-deposition.
Article in the shop: https://shop.mtp-music.de/artikel-details/WZ2021.aspx

WZ203 WIZARD DECALCIFICATION CLEANER CONCENTRATED
Attacks all lime and scale residues, verdigris and dried grease. Prevents corrosion and restores shine without mechanical action. Does not attack metals without affecting most plastics and corks. Fast and economical. Ideal for elbows, piston valves, rotary cylinder valves, butterfly valves and joints. Soak in a bath containing up to 50% WZ 203 (and 50% water). The decalcification time depends on the thickness of the coating. WZ 203 will restore the copper luster in the alloy. Rinse thoroughly with soapy water. Stabilize with WIZARD WZ402 passivation solution. This will delay re-deposition.
Article in the shop: https://shop.mtp-music.de/artikel-details/WZ2031.aspx

WZ204 WIZARD LIQUID STRIPPER
Fast and powerful stripper for mono- or two-component paints and varnishes as well as oven-cured epoxy paints. Does not attack treated substrates, which can be repainted after dripping and drying. Use undiluted in the bath, with brush or spray.
Allow to act and remove with a spatula or brush. Rinse with a pressure jet. Stabilize with WIZARD WZ402 passivation solution. Work in a ventilated area.
Article in shop: https://shop.mtp-music.de/artikel-details/WZ2041.aspx

WZ205 WIZARD ABBEIZER GEL
Fast and powerful stripper for mono- or two-component paints and varnishes and oven-cured powders. Does not attack treated substrates, which can be repainted after dripping and drying. Use neat with a brush. Allow to act and remove with a spatula or brush. Rinse with a pressure jet. Stabilize with WIZARD WZ402 Passivation Solution. Work in a ventilated area.
Article in shop: https://shop.mtp-music.de/artikel-details/WZ2051.aspx

WZ206 WIZARD METAL DEETTER
Thoroughly removes dust, grease, oils, residues from mechanical parts and polishing paste. Dries very quickly at room temperature (2 times faster than ether). Use with a cloth, brush or spray. Allow to act until completely evaporated. Repeat the process if necessary.
Article in the shop: https://shop.mtp-music.de/artikel-details/WZ2061.aspx

WZ207 WIZARD ULTRASONIC CLEANER
Chemical degreaser of ferrous and non-ferrous metals for ultrasonic equipment. Degreases, deoxidizes and shines effectively. Augmented alkali solution of the highest quality for better results. Clean in a bath in an ultrasonic cleaner from 20 to 70 ° C or diluted 1 : 5 (with 5 parts water) for greasy or oily surfaces. Use in a well ventilated area. Wash hands after handling.
Article in the shop: https://shop.mtp-music.de/artikel-details/WZ2071.aspx

WZ301 WIZARD FLAME PROTECTION
Translucent gel, acts as a heat shield, protects all paints from soldering flames. Does not stain, non-toxic, non-caustic. Shake well and spray in a thick layer (approx.1 mm) directly on the area to be protected and 5 cm around. Reapply if necessary during soldering. The protection time depends on the heat and duration. After soldering, wipe off excess gel, preferably rinse with hot water and rub with a soft brush. Can be applied with a brush.
Article in shop: https://shop.mtp-music.de/artikel-details/WZ3011.aspx

WZ306 WIZARD METAL DEFETTER - SPRAY 500ml
Thoroughly removes dust, grease, oils, residues of mechanical parts and polishing paste. Dries very quickly at room temperature (2 times faster than ether). Hold the aerosol vertically. Spray directly onto the surface to be treated from a distance of 5 cm to 25 cm. Allow to act until completely evaporated. Repeat the process if necessary. Watch out for splashing due to the force of the jet. Wear goggles. Can also be sprayed on a cloth.
Article in the shop: https://shop.mtp-music.de/artikel-details/WZ3061.aspx

WZ402 WIZARD ALKALIN PASSIV
The passivation with an alkaline solution is an essential step after the treatment of pickling, descaling and generally to neutralize the acidity. The alkaline passivator protects the brass (zinc) from atmospheric corrosion and delays new calcification. Can be used by soaking in a PVC tub, spraying and by application with a brush. The bath should always be clean.
Article in the shop: https://shop.mtp-music.de/artikel-details/WZ402.aspx

WZ501 WIZARD SUPER CLEANER FOR ALL METALS
Creamy cleaning paste for light metals (copper, brass, silver, gold, aluminium), cleans, removes scratches, restores shine and protects against stains. Apply a small amount of Wiznet to a damp sponge, rub surface, rinse with water and polish with a dry cloth. Can also be applied with a polisher, steel wool or a dipped abrasive strip.
Articles in the shop: https://shop.mtp-music.de/artikel-details/WZ5011.aspx

By the way, this before/after picture uses valves that are about 95 years old.